Metal Hydrocyclone Filter-20

GENERAL SPECIFICATION

▪️ Body Material                           : S235JR

▪️ Maximum Working Pressure       : 8 bar; 116 Psi

▪️ Maximum Working Temperature  : 60°C; 140°F

▪️ Painting Method                        : Electrostatic Powder Coating

▪️ Paint Coating Material                : Epoxy-Polyester

▪️ Minimum Flow Rate                   : 2020: 20 m³/h

                                                      2025: 30 m³/h

                                                      2030: 40 m³/h

                                                      2040: 50 m³/h

                                                      2040S: 75 m³/h

                                                      2050: 100 m³/h

                                                      2060: 150 m³/h

CLEANING PROCESS

During filtration, solid particles accumulate in the collection tank at the bottom. This tank is periodically purged through a discharge valve. The valve's operation can be either manual, requiring user intervention, or fully automatic, triggered by a controller.

WORKING PRINCIPLE

Hydrocyclone filters separate suspended solids from liquids using the principle of centrifugal force, with no moving parts or filter media. When the water mixture enters the hydrocyclone's conical body at a high-speed, tangential angle, it creates a powerful swirling vortex. This rapid rotation throws heavier particles like sand and silt to the outer wall, where they spiral down to be collected in a separation tank at the bottom. Meanwhile, the cleaner, lighter water is drawn up through the center of the vortex and exits through the top outlet, ready for use.